Articles
SDA Bedroom Size Requirements for Fully Accessible and High Physical Support Categories
- ROOT
- Articles
- Thursday, 12 February 2026 10:06
- Thursday, 12 February 2026 09:58
- Administrator
- Hits: 431
The NDIS Specialist Disability Accommodation (SDA) Design Standard focuses on functional clear spaces rather than a single fixed square-metre minimum for bedrooms. The requirements are stricter in the Fully Accessible (FA) and High Physical Support (HPS) categories to support wheelchair access, attendant care, equipment, and safe movement.
Core Dimensional Requirements (Both FA and HPS)
- Accommodates a queen-sized bed (approx. 1530 mm × 2030 mm).
- Clear space beside the bed:
- Minimum 1540 mm clear on one long side (typically the main transfer/carer side).
- Minimum 1000 mm clear on the other three sides of the bed.
- Door circulation space: At least 1540 mm wide × 1450 mm deep clear area at the doorway for wheelchair manoeuvring.
- Wardrobe: Minimum 1400 mm wide clear space.
- Corridors: Minimum 1200 mm clear width.
- Doors used by the participant: Minimum 900–950 mm clear opening (950 mm preferred for HPS).
These clearances usually result in practical minimum bedroom sizes of 12–16 m². In well-planned layouts, a compact yet compliant room can measure approximately 3850 mm × 3650 mm (external dimensions, allowing for building tolerances, wall linings, and skirtings).
Design Tip – Efficient Wardrobe Placement Placing the wardrobe opposite the bed and adjoining the door is significantly more efficient than locating it on one side of the bed. This layout allows the circulation space required for the wardrobe to share the door circulation zone, keeping it clear of the bed. The result is a more compact, functional room (around 3850 × 3650 mm) without compromising clearances or usability.
Additional Requirements for High Physical Support (HPS)
HPS builds on the FA clearances with:
- Structural reinforcement and space for ceiling hoist tracks (straight or curved paths over the bed and transfer areas to the bathroom).
- Extra clear floor area for mobile hoists, medical equipment, or multiple carers.
- Cabling and space provisions for emergency backup power systems.
HPS bedrooms are often designed slightly larger in practice (14–18 m²+) to accommodate hoist infrastructure comfortably.
Important Notes
- Exact overall room size is performance-based — it must deliver the required clear spaces and be verified by an accredited SDA assessor.
- Rooms can (and often should) be larger than the minimum to improve liveability, especially for participants needing significant equipment or dual-carer support.
- These requirements apply to each participant bedroom. The OOA (overnight assistance) room has lighter dimensional standards.
This efficient wardrobe layout is a practical way to achieve compliance in smaller footprints while maintaining excellent functionality — something our team has successfully applied across multiple FA and HPS SDA projects.
What Makes a Robust Category SDA Home Different: Key Upgrades Required for an NCC Class 3 Two-Bedroom Dwelling with On-Site Overnight Assistance
- ROOT
- Articles
- Thursday, 12 February 2026 09:34
- Thursday, 12 February 2026 09:33
- Administrator
- Hits: 396
What Makes a Robust Category SDA Home Different: Key Upgrades Required for an NCC Class 3 Two-Bedroom Dwelling with On-Site Overnight Assistance
Specialist Disability Accommodation (SDA) under the National Disability Insurance Scheme (NDIS) delivers purpose-built housing for participants with extreme functional impairment or very high support needs. The Robust design category specifically targets individuals whose complex behaviours (often linked to autism, psychosocial conditions, or other disabilities) may lead to property damage, self-harm risks, or safety concerns for others. These homes balance durability and resilience with a reasonable level of physical access.
When a two-bedroom SDA dwelling includes on-site overnight assistance (OOA) and falls under NCC Building Class 3, it triggers stricter requirements than a conventional suburban house (typically Class 1a). Class 3 applies to residential buildings providing long-term accommodation for unrelated persons, including people with disabilities and support staff. In a two-bedroom layout, one bedroom usually serves the participant, while the second functions as the OOA room for the overnight support worker.
A standard suburban two-bedroom home features basic construction, standard finishes, single-family fire safety, and no specialist provisions. An NCC Class 3 Robust SDA dwelling requires significant enhancements for safety, longevity, regulatory compliance, participant wellbeing, and operational support. Here are the main items over and above a conventional suburban dwelling.
1. NCC Class 3 Building Classification Requirements
Class 3 imposes higher performance standards under the National Construction Code (NCC) due to multiple unrelated occupants (participant(s) + staff):
- Enhanced fire safety systems, including automatic smoke detection, emergency lighting and exit signage, fire-rated walls/doors/ceilings for compartmentation, and often automatic fire sprinklers (depending on jurisdiction and layout).
- Improved acoustic separation between rooms and to the exterior to ensure privacy and reduce disturbances.
- Stricter structural, health, and amenity provisions for long-term multi-occupant use, such as better ventilation, natural light access, and egress paths.
These exceed the basic smoke alarms and standard fire separation found in a typical suburban house.
2. Robust Design Category Features (SDA Design Standard)
The NDIS SDA Design Standard (mandatory for new builds since 2021) requires Robust homes to be highly resilient while incorporating Livable Housing Australia (LHA) Silver level physical access or better. Key upgrades include:
- Reinforced and impact-resistant construction: High-impact wall linings (e.g., additional framing with fibre cement or robust plasterboard), solid-core doors with heavy-duty hardware, and protected frames to withstand heavy use or behaviours of concern.
- Secure windows and glazing: Laminated or shatter-resistant glass, security screens, and restricted openings for safety and to minimise risks of absconding or injury.
- Durable fixtures and fittings: Tamper-resistant taps, showerheads, toilet seats, handles, and grab rails; reinforced cabinetry and benchtops (e.g., solid surfaces resistant to damage).
- Robust flooring and surfaces: Highly durable, slip-resistant, and shock-absorbing materials (such as commercial-grade vinyl) that are easy to clean and reduce injury risk.
- Soundproofing and layout safeguards: Enhanced acoustic treatment where noise disturbances are likely, plus thoughtful design for safe egress, retreat areas, or breakout spaces tailored to the participant’s needs.
These features reduce reactive maintenance, protect occupants and neighbours, and create a safer, more sustainable living environment—far beyond standard residential drywall, hollow-core doors, and basic finishes.
3. On-Site Overnight Assistance (OOA) Facilities
OOA requires dedicated space for a support worker to stay overnight, which is critical in a compact two-bedroom dwelling:
- A private, lockable OOA room (typically the second bedroom) with adequate space for a bed, storage for personal items and equipment, and comfort for rest.
- Appropriate staff access to bathroom and kitchen facilities while maintaining participant privacy and dignity (e.g., through design sequencing or timing protocols).
- Accessibility alignment: The OOA room and pathways must support safe movement, particularly if the dwelling also meets higher accessibility standards.
A conventional suburban home has no provision for live-in or overnight staff accommodation or associated privacy/operational considerations.
4. Additional Accessibility and Universal Design Elements
Robust dwellings incorporate reasonable physical access (LHA Silver level baseline):
- Step-free entry and internal circulation.
- Wider doorways (typically minimum 870–1000 mm clear openings).
- Spacious, reinforced bathroom design with grab rails, room for assistance or equipment, and slip-resistant surfaces.
- Adaptable heights and layouts for fixtures where practical.
Many Robust projects exceed the minimum by incorporating elements from Fully Accessible or High Physical Support categories when participant needs require it.
5. Other Essential Enhancements and Compliance
- Secure outdoor areas (e.g., fenced courtyards with safety features).
- Readiness for assistive technology (e.g., environmental controls, emergency call systems, monitoring with privacy safeguards).
- Secure storage for medications, equipment, or valuables.
- Full certification by an accredited SDA assessor confirming compliance with the SDA Design Standard, NCC, and state/territory requirements.
- Higher overall construction quality for longevity, including performance solutions where needed to meet both SDA and building code objectives.
Why These Features Matter
These upgrades create a home that is safer, more durable, and better suited to high-support needs while remaining as home-like as possible. They reduce long-term maintenance costs, minimise risks, and support better participant outcomes and staff efficiency. In contrast, a conventional suburban dwelling lacks the resilience, fire safety, staff provisions, and specialist design required for NDIS SDA enrolment and funding.
Designing a compliant Class 3 Robust SDA dwelling demands close collaboration between architects, access consultants, and accredited assessors to balance regulatory requirements with individual participant needs. Specialist expertise ensures the home is not only compliant but also functional, dignified, and future-ready.
If you are planning, developing, or investing in SDA housing, engaging professionals experienced in NDIS SDA projects from concept through to certification is essential for success.
2026 NDIS Reforms: What the Changes Mean for Specialist Disability Accommodation (SDA) Housing Design and Participant Outcomes in Sydney
- ROOT
- Articles
- Wednesday, 11 February 2026 23:35
- Wednesday, 11 February 2026 23:33
- Administrator
- Hits: 481
2026 NDIS Reforms: What the Changes Mean for Specialist Disability Accommodation (SDA) Housing Design and Participant Outcomes in Sydney
The National Disability Insurance Scheme (NDIS) is undergoing its most significant transformation yet in 2026. From mid-2026, the new framework planning supported by the I-CAN v6 assessment tool will be phased in, while the Thriving Kids program begins on 1 October 2026 (full rollout by 1 January 2028). These changes, underpinned by the historic bilateral agreement between the Australian Government and all states and territories, are designed to create more consistent, sustainable, and earlier intervention supports — and to redirect children aged 8 and under with low to moderate developmental delay or autism to state-based foundational services.
For SDA providers, architects, builders, and NDIS participants across Sydney, NSW, and beyond, the reforms place even greater emphasis on evidence-based, NDIS-compliant SDA housing design that demonstrably improves independence, safety, and outcomes for people with extreme functional impairment or very high support needs.
At Sydney Access Consultants (sydneyaccessconsultants.com.au), our team — led by Principal Architect (Malaysia) and Qualified Access Consultant Daniel Wong (25+ years in architecture, Diploma in Access Consulting 2017, and hands-on delivery of ~20 SDA and group home projects across NSW) — delivers specialist disability accommodation expertise that meets the National Construction Code (NCC), AS 1428, Disability (Access to Premises – Buildings) Standards 2010, Livable Housing Design Guidelines, and the updated SDA Design Standard.
Our team provides seamless coordination for Australian projects: • Chong Yee Jean (Part I Architect, 6+ years Australian SDA experience) • Nur Syuhada Binti Che Rahimi (Graduate Architect, 10+ completed SDA, residential, and childcare projects) • Ahmad Syafiq Bin Mohd Unzir (Graduate Architect, Certificate IV-equivalent access consulting, performance solutions specialist)
We combine deep accessibility knowledge with practical project delivery to help Sydney-based clients achieve NDIS funding approval and high-quality, future-proof SDA homes.
Key 2026 NDIS Changes and Their Direct Impact on SDA Housing Design in Sydney
1. New Framework Planning & I-CAN v6 Assessment Tool (mid-2026 onwards) Accredited assessors will use the digital, strengths-based I-CAN v6 tool across 12 domains (mobility, self-care, communication, etc.) to produce transparent support-needs scores. This reduces reliance on lengthy clinician reports and tightens SDA eligibility to participants with extreme functional impairment or very high support needs.
What this means for SDA design in Sydney: Designs must clearly demonstrate how they address these needs — zero-step entries, reinforced ceiling structures for hoists, wider doorways and circulation paths, adaptable smart-home technology, and flexible room layouts.
Our team’s proven Sydney track record includes: • 26 Incense Place, Casula – High Physical Support group home • 245 Beames Ave, Mt Druitt – High Physical Support group home • 61 Fennell St, North Parramatta – High Physical Support group home
We deliver rapid concept sketches, Performance-Based Design Briefs (PBDBs), on-site inspections, Archicad BIM coordination, and builder guidance to avoid costly variations and secure NDIS approval.
2. Thriving Kids Program & Early Intervention Shift (1 October 2026) Children aged 8 and under with low to moderate needs will transition to state-delivered supports (family coaching, community allied health) outside the NDIS. Existing participants remain unchanged until full rollout in January 2028.
Implication for long-term SDA housing: Homes must be future-proofed with universal design features such as adjustable benchtops, sensor lighting, spacious wet areas, and adaptable layouts that support children as they grow into adulthood.
Our current childcare and residential experience (e.g., 64 Kids Childcare, Thornleigh, and 58 Kids Childcare, South Hurstville) ensures SDA homes in categories like High Physical Support, Improved Liveability, and Robust meet both current NDIS requirements and future family needs.
3. SDA Design Standard Review & Pricing Updates (2026) The NDIS is reviewing the SDA Design Standard with a new edition expected in 2026. Providers will face stricter value-for-money scrutiny, outcome-focused reporting, and evidence requirements in Special Disability Reports.
We prepare robust Special Disability Reports, access audits, and performance solutions that satisfy both the NDIS and local councils. Our templates and process improvements ensure pragmatic, creative compliance that maximises participant outcomes and funding certainty.
Practical Tips for Sydney SDA Providers Navigating 2026 NDIS Reforms
- Engage a qualified access consultant at the concept stage (early involvement saves 10-20% in variation costs)
- Adopt performance-based design for innovative, participant-centred solutions
- Prepare comprehensive Special Disability Reports and supporting documentation
- Incorporate universal design principles for longevity and broader market appeal
- Stay informed on phased rollouts to protect your SDA investment
Ready to Future-Proof Your Sydney SDA Project?
Whether you are: • An SDA provider seeking NDIS certification for new group homes in Sydney or Western Sydney • A developer planning accessible housing in Parramatta, Liverpool, or the Hills District • An architect requiring performance solutions and BIM coordination • A Malaysian stakeholder exploring cross-border universal design aligned with MS 1184 and Australian standards
…Sydney Access Consultants delivers expert, pragmatic support that turns regulatory complexity into exceptional, NDIS-compliant outcomes.
Next steps: • Book a free initial consultation to discuss how the 2026 NDIS reforms affect your project • Request guidance on SDA group homes, Special Disability Reports, access audits, or performance solutions
Email:
Let’s design disability accommodation in Sydney that truly empowers independence and inclusion. Contact Sydney Access Consultants today — your project benefits from proven local expertise and national NDIS insight.
2026 NDIS Reforms: What the Changes Mean for Specialist Disability Accommodation (SDA) Housing Design and Participant Outcomes
- ROOT
- Articles
- Wednesday, 11 February 2026 09:23
- Wednesday, 11 February 2026 09:23
- Administrator
- Hits: 421
2026 NDIS Reforms: What the Changes Mean for Specialist Disability Accommodation (SDA) Housing Design and Participant Outcomes
The National Disability Insurance Scheme (NDIS) is undergoing its most significant transformation in years, with major reforms rolling out in 2026 that will reshape how supports are planned, funded, and delivered. Key changes include the introduction of new framework planning using the I-CAN v6 assessment tool from mid-2026, and the phased launch of the Thriving Kids program starting October 2026 (with full rollout by January 2028). These updates aim to create fairer, more consistent, and sustainable disability supports—but they also raise important questions for Specialist Disability Accommodation (SDA) providers, designers, and participants focused on accessible, inclusive housing.
Our team at Sydney Access Consultants combines qualified access consulting expertise with architectural design experience to deliver NDIS-compliant SDA projects, accessibility audits, performance solutions, and universal design aligned with Australian standards (National Construction Code, AS 1428, Disability (Access to Premises – Buildings) Standards 2010, and Livable Housing Design). With proven SDA group homes in NSW (High Physical Support and Improved Liveability categories), childcare centres, residential developments, and strong delivery across Sydney, Brisbane, Perth, and other Australian markets, we are SDA-accredited assessors and expert architects supporting clients nationwide.
Key NDIS Changes in 2026 and Their Implications for SDA
1. New Framework Planning and the I-CAN v6 Tool From mid-2026, accredited assessors will use the I-CAN v6 tool to evaluate support needs across daily life domains, generating transparent scores for budgets and plans. SDA eligibility requires evidence of extreme functional impairment or very high needs—designs must therefore prioritise features like zero-step entries, hoist-compatible ceilings, wider circulation spaces, and adaptable smart-home elements.
Early engagement prevents costly rework. We provide quick sketches, Performance-Based Design Briefs (PBDBs), on-site inspections, and builder guidance throughout construction.
2. Thriving Kids Program and Early Intervention Shifts Children aged 8 and under with mild to moderate conditions will transition to state-based foundational supports from October 2026. This shift underscores the importance of long-term adaptable housing that supports growing independence—universal design features such as adjustable heights and sensor technology become essential.
Our completed projects (e.g., 61 Fennell St, North Parramatta – High Physical Support; 17 Mistral Place, Shalvey) demonstrate how compliant, thoughtful SDA design enhances safety, independence, and quality of life.
3. Broader Impacts on SDA Design and Compliance Ongoing reviews of the SDA Design Standard are seeking greater flexibility and innovation alongside annual pricing updates. Expert input is critical to achieving NDIS enrolment success, value-for-money outcomes, and robust Special Disability Reports.
Practical Tips for Navigating 2026 NDIS Changes in SDA Projects
- Involve qualified access consultants at the concept stage for seamless integration.
- Leverage performance solutions for innovative, cost-effective compliance.
- Prepare detailed access audits and reports to support NDIS funding applications.
- Prioritise universal design for longevity and broader market appeal.
- Monitor phased rollouts closely to future-proof your SDA investments.
The 2026 reforms present a valuable opportunity to build more equitable, resilient, and participant-focused spaces. Our established track record in NDIS SDA design, group homes, access consulting, and compliant architectural projects across Australia positions us to guide you successfully through these changes.
Ready to Future-Proof Your SDA Project or Inclusive Design?
Whether you’re an SDA provider seeking NDIS-compliant certification, a developer planning accessible housing in Sydney, Brisbane, Perth or elsewhere, or an architect needing performance solutions and BIM coordination—our team is here to help.
- Book a free initial consultation to discuss your project, the impact of the NDIS reforms, or your accessibility audit needs.
- Contact us for expert advice on SDA group homes, performance-based solutions, or Special Disability Reports.
- Reach Daniel Wong (Principal Architect & Access Consultant) or Gary Finn (SDA Accredited Assessor & Principal Architect) today.
Phone: (+61) 2 9586 3111 Email:
Let’s collaborate to create spaces where everyone can thrive—independent, safe, and inclusive. Contact us now—your next project deserves expert guidance.
Passive SDA Investment Australia: Potential for High Yields Without Care or SIL Supports
- ROOT
- Articles
- Tuesday, 10 February 2026 16:03
- Tuesday, 10 February 2026 15:38
- Administrator
- Hits: 459
Passive SDA Investment Australia: Potential for High Yields Without Care or SIL Supports
Published: February 2026 | Sydney Access Consultants
Small property owners across Australia are increasingly attracted to passive SDA investment as a way to generate attractive, government-backed returns through Specialist Disability Accommodation (SDA) under the NDIS — without the need to deliver personal care, rostering, or Supported Independent Living (SIL) supports.
The key advantage is that SDA funding covers the specialised housing itself, while SIL funding is entirely separate. This allows investors to focus solely on property ownership and management.
What Is SDA vs SIL Under the NDIS?
SDA (Specialist Disability Accommodation) pays for purpose-built or adapted accessible housing.
SIL funds on-site staffing and daily living assistance.
This separation means you can operate successfully as a registered SDA provider while remaining completely hands-off from care and support services.
Why Small Investors Are Choosing Direct SDA Provider Registration
More owners are looking to registering their own entity as an SDA provider and managing the dwellings directly. This passive model offers several advantages:
- Potential for Stronger Net Returns — By removing middleman fees and profit-sharing, a larger portion of the SDA payments flows directly to the owner.
- Full Control as a Property Owner — You retain ownership of the asset, benefit from long-term capital growth in accessible housing, and manage standard landlord responsibilities.
- Minimal Day-to-Day Involvement — List vacancies on the official SDA Finder and form light referral relationships with SIL providers who handle participant matching and care.
Ideal for Legacy SDA Properties
Existing apartments previously enrolled under older guidelines can often be re-enrolled under your own entity. An independent Accredited SDA Assessment quickly identifies any compliance gaps, allowing activation of SDA funding from an informed position.
Important Considerations & Risk Warning
Like any property investment, SDA carries inherent risks. Success depends on sound property selection, location, design quality, and ongoing management. SDA funding and occupants should never be relied upon to make a fundamentally poor investment successful.
While the passive model avoids care delivery, you will still need to:
- Complete full NDIS provider registration (adding the SDA group) and pass an audit against the NDIS Practice Standards.
- Actively manage vacancies (national rates currently sit around 40–45%, varying by location and design category).
- Maintain ongoing compliance to protect enrolment and funding eligibility.
Most small investors outsource day-to-day tenancy and maintenance to professional property managers to keep their involvement truly passive.
Is Passive SDA Investment Right for You?
If you are a small property owner seeking the potential for high yields from accessible housing — without entering the disability support space — the direct ownership model can be a strong fit, provided you approach it with realistic expectations and proper due diligence.
FAQ – Passive SDA Investment Australia
- Can I become an SDA provider without providing SIL or care?
Yes. Many providers focus solely on supplying compliant housing. - How do I start with legacy SDA properties?
Begin with an independent Accredited SDA Assessment to evaluate compliance and re-enrolment potential.
Ready to Explore Passive SDA Investment Opportunities?
At Sydney Access Consultants, we provide independent Accredited SDA Assessments for property owners across Australia. We deliver a clear, objective report on your dwellings and the first step needed towards building enrolment. For investment advice, you'll need to talk to a financial expert.
Gary Finn
Accredited SDA Assessor
Sydney Access Consultants
Website: sydneyaccessconsultants.com.au
Contact us today for a no-obligation discussion or to arrange an assessment of your properties.
NCC Performance Solution: Single-Sided Handrails for Safe, Inclusive Shop Entry – Case Study from RALPH Alexandria
- ROOT
- Articles
- Tuesday, 10 February 2026 11:58
- Tuesday, 10 February 2026 11:57
- Administrator
- Hits: 458
NCC Performance Solution: Single-Sided Handrails for Safe, Inclusive Shop Entry – Case Study from RALPH Alexandria
At Sydney Access Consultants, we specialise in finding practical ways to meet the National Construction Code (NCC) and Disability (Access to Premises – Buildings) Standards while removing barriers for people with disability. Our goal is always sensible solutions that make buildings easier and safer for everyone—not just those with disability, but pram users, delivery teams, elderly visitors, and anyone navigating changes in level.
We recently provided expert advice on a Performance Solution for a retail shop tenancy in the premium RALPH Alexandria mixed-use development at 45-47 Ralph Street, Alexandria NSW. Developed by Lateral Estate Pty Ltd and designed by award-winning architects Smith & Tzannes, RALPH features 112 luxury apartments plus ground-floor retail spaces, with completion targeted for early 2026.
The Challenge: Flood Protection Creates a Short Two-Step Descent
Ralph Street in Alexandria is prone to periodic flooding. To protect the shop tenancy, the internal floor level (including the entry mat well) was raised two steps above the street pavement. This creates a low-rise descent of just two steps at the primary street entry—total rise around 300 mm assuming standard riser heights.
Under the Deemed-to-Satisfy (DTS) provisions of NCC 2022 (as amended) and AS 1428.1:2021:
- Stairs (two or more risers) require handrails on both sides (Clause 11.2(b) and Clause 12).
- Full bilateral handrails would encircle the narrow mat well, potentially restricting flow, cleaning, or aesthetics in a high-end retail space.
A fully compliant accessible ramp (with gradients, landings, and handrails on both sides per AS 1428.1) is provided at a secondary entrance to the same tenancy. The primary steps serve as a short, convenient secondary path for able-bodied users.
Our Performance Solution: Complying Handrails on One Side Only
We developed and documented a Performance Solution under DP4 (Access for people with a disability) of NCC Volume One. This satisfies the Performance Requirement: buildings must provide safe access and use for people with disability to the degree necessary.
Key features of the approved solution:
- Complying handrails (865–1000 mm height, 30–52 mm diameter, continuous with extensions, ≥50 mm clearance) installed to the southern side only.
- Northern, eastern, and western sides of the mat well remain open—no handrails.
- Tactile Ground Surface Indicators (TGSI – warning type) provided all around the steps (top and bottom per AS 1428.1 Clause 10) for reliable advance warning and edge detection.
- Step nosings with slip-resistant finish (P4 or better wet pendulum classification) and ≥30% luminance contrast to tread and riser.
- Lighting levels ≥200 lux at the steps.
Why This Works: Equivalent Safety Through Smart Design
The narrow mat well width (typically 1.5–2 m clear) means a person needing handrail support can easily reach and grip the southern handrail from either side of their body—within about 1 m across their stride or body position. This provides equivalent stability and confidence for the very short descent/ascent, compared to full bilateral handrails on such a low-rise change in level.
The full TGSI surround, high-contrast nosings, and good lighting further reduce mis-step risk and support people with low vision. The alternative ramp entrance offers a zero-step, fully supported option for wheelchair users, scooter riders, or anyone preferring no steps.
In our expert judgement (as accredited members of the Association of Access Consultants Australia), this delivers equivalent or better safety and independence than strict DTS compliance. Risk of falls or disorientation is not increased—it's managed through enhanced tactile and visual cues.
Broader Benefits: Universal Design in Action
This solution removes unnecessary barriers while making the entry more practical for all users:
- Easier for pram pushers or delivery trolleys to navigate the short steps without rails blocking the full width.
- Cleaner lines and better flow in a premium retail space.
- Inclusive choice: steps for quick access, ramp for full support.
We followed the ABCB Performance Solution Process Handbook (2024 update), starting with a Performance-Based Design Brief agreed by stakeholders—including Lateral Estate, Principal Certifier Ian Pickering of Advance Building Approvals Pty Ltd, and the project architect.
How We Can Help Your Project
Performance Solutions like this are common in retail fit-outs, heritage-sensitive sites, or flood-prone areas. They allow sensible, cost-effective compliance without compromising design or usability.
If you're a developer, architect, certifier, or business owner facing similar access challenges—whether handrails, ramps, TGSI, toilets, or signage—contact Sydney Access Consultants today. We're experts in NCC 2022, AS 1428 series, DDA Premises Standards, and practical universal design.
Phone: (02) 9586 3111 or 0414 414 101 Email:
Let us help you create buildings that work better for everyone.
Gary Finn – Accredited Access Consultant #435, Principal Design Practitioner #PDP0000496