Call now – (02) 9586 3111

SDA, Livable Housing and adaptable housing: questions and answers

Questions about the SDA Design Standard and certification, SDA design categories, Livable Housing, and adaptable housing under AS 4299. Each answer is short and links to the page that covers the subject in full. Answers refer to the code in force in NSW: NCC 2022 Amendment 2 until NSW adopts NCC 2025 on 1 May 2027.

All questions and answers

From: Adaptable housing requirements in Sydney: council-by-council (current as at November 2026)

Does every Sydney council require 20 percent adaptable housing to AS 4299?

No. The 20 percent figure most teams remember is the Apartment Design Guide Silver benchmark, not an AS 4299 quota. Council DCPs set adaptable housing, and many go further or use a different instrument.

What does Apartment Design Guide Objective 4Q-1 actually require?

A benchmark of 20 percent of apartments incorporating Livable Housing Design Guidelines Silver-level universal design features. Adaptable housing is left to the relevant council policy under Objective 4Q-2.

Does Canterbury-Bankstown still require AS 4299 adaptable units?

No. The current DCP chapters for residential flat buildings and shop-top housing do not call up AS 4299. They call up Livable Housing Design Guidelines Silver and Gold levels.

What is the difference between AS 4299 Class A, B and C?

Class C is the class most councils name for adaptable dwellings. Class A is the highest.

From: Adaptable Housing (AS 4299) reports for NSW Development Applications

What percentage of dwellings must be adaptable in NSW?

There is no statewide percentage. Confirm the DCP. Fetched examples include Inner West (minimum 10 percent Class C, sliding to 20 percent on larger schemes), North Sydney (minimum 20 percent adaptable for certain multi-dwelling / flat building / shop-top projects with more than five dwellings). Bayside DCP 2022 (section 3.6.2 C3): a minimum 20 percent of dwellings in multi dwelling housing, shop-top housing and residential flat buildings with 10 or more dwellings must be adaptable to AS 4299 Class C.

Do we need pre- and post-adaptation plans for Class C?

Yes. Without both layouts the report cannot show that essential features are achievable after adaptation.

Do we still need a separate disability access report if we have an AS 4299 report?

Usually yes, where the building has common areas or other parts that trigger the Premises Standards and NCC access provisions. The adaptable report does not replace that work.

From: Livable Housing Design by State (2026): Who Requires It, When, and Why Not NSW

Is livable housing mandatory in NSW?

No. NSW has not adopted the National Construction Code's livable housing provisions. In the NSW variations, Part H8 (houses) and Part G7 (apartment sole-occupancy units) are deliberately left blank, so the ABCB Standard for Livable Housing Design is not a building code requirement for new NSW homes or apartments. A project can still be asked to include livable housing features through a planning control, consent condition, housing provider brief or client specification, so check the project's own documents.

Which states have adopted the livable housing design standard?

Under NCC 2022, the livable housing provisions started in Queensland and the Northern Territory on 1 October 2023, the ACT on 15 January 2024, Victoria on 1 May 2024, and South Australia and Tasmania on 1 October 2024. NSW and Western Australia chose not to adopt them. State variations can change, so confirm the current position on the ABCB adoption page and the state regulator's website before relying on a date.

What does the livable housing design standard require?

The standard requires six things in a new dwelling: a step-free path from the street, parking or garage to the entrance; a level, step-free entrance door; internal doors and corridors on the entry level that allow easy movement; a toilet on the entry level; a shower that can be used independently; and reinforced bathroom and toilet walls so grabrails can be fitted later without removing linings. Sloping or tight sites can be exempt from the step-free path, but the other features still apply.

From: SDA Design Standard FAQ: what applies in 2026, the four categories, and who certifies

What is the SDA Design Standard?

The Specialist Disability Accommodation (SDA) Design Standard outlines the detailed design requirements for prospective SDA dwellings. It was published in October 2019 and applies to all new and new build refurbished SDA from 1 July 2021. The Standard has four design categories set out in the SDA Rules: improved liveability, robust, fully accessible and high physical support. It improves clarity about design requirements so that participants can access high-quality housing, providers have flexibility to respond to needs, and architects and builders have clear information.

Which SDA Design Standard edition applies today?

New SDA is designed and certified to the currently published SDA Design Standard on the NDIS website, Edition 1.1 issued 25 October 2019. The NDIA has engaged KPMG to review it and develop Edition 2.0, but until Edition 2.0 is published with transition rules, the current Standard is the design basis.

Is it the same as the NCC, Livable Housing or AS 1428.1?

No. The National Construction Code still applies to the building for classification, structural, waterproofing and other requirements. Where the NCC and the Design Standard conflict on spatial items, the Design Standard applies for enrolment purposes, but the NCC takes precedence on its own matters. In NSW, building work is assessed against NCC 2022 Amendment 2 until NSW adoption of NCC 2025 on 1 May 2027. Premises Standards access, where it applies to common areas, references AS 1428.1:2021 from 29 July 2025.

What changes when Edition 2.0 comes out?

What is known is that the NDIA engaged KPMG for an independent review, consultation closed on 19 December 2025, a Technical Working Group is advising, and the review will develop Edition 2.0 with an implementation plan. What is not known is the published text or any transition rules. Practical advice is to design and certify to the current Edition 1.1 and date your assumptions.

Does it apply to existing SDA stock?

The NDIS site states that the SDA Design Standard does not apply to dwellings seeking enrolment as existing or legacy stock SDA. Requirements for that stock are set out in the SDA Rules and the Pricing Arrangements. Check with the NDIA for a specific dwelling.

Who pays, and does the category change the price?

Funding and pricing are separate from design certification. The NDIS Pricing Arrangements for SDA set maximum prices by building type, design category and location.

Who certifies an SDA dwelling?

An independent, accredited SDA assessor certifies the design twice: a provisional design certification on the drawings and a final as-built certification once construction is complete. The assessor can't have designed the dwelling. Certification is separate from enrolment, which the SDA provider lodges with the NDIA.

From: Converting an existing apartment to High Physical Support SDA in NSW: the four tests to pass before you buy

Does the building stay Class 2? Do the Premises Standards apply?

The certifier determines the NCC classification; it normally remains Class 2. The Premises Standards generally do not apply to Class 2 (the exception is a new building with short-term rent accommodation, and they never apply inside a sole-occupancy unit).

From: Fully Accessible SDA: what the design category requires for new builds in NSW

What is Fully Accessible SDA?

Fully Accessible is one of four NDIS Specialist Disability Accommodation design categories. It is housing designed to incorporate a high level of physical access provision for people with significant physical impairment, certified against the SDA Design Standard for New Build dwellings enrolled from 1 July 2021. An accredited SDA assessor certifies the dwelling at design stage and again as built.

How does Fully Accessible relate to High Physical Support?

Fully Accessible sets the physical-access baseline. High Physical Support builds on that baseline and adds the life-support, hoist and emergency-power suite required by the Design Standard for the High Physical Support category. Choosing Fully Accessible versus High Physical Support is an early design decision.

Does an Fully Accessible new build follow informal dimension lists?

No. For New Build and New Build (refurbished) enrolled from 1 July 2021, the SDA Design Standard (October 2019, Edition 1.1) is the test. Informal lists go stale.

Can one dwelling be Fully Accessible and another category?

Yes. The Design Standard allows a single dwelling to be certified under multiple design categories. All shared areas must comply with the minimum requirements of every enrolled category.

From: High Physical Support SDA: what the design category requires for new builds in NSW

What is High Physical Support SDA?

High Physical Support is one of four NDIS Specialist Disability Accommodation design categories. It is intended for participants who need a high level of physical support and is built on Fully Accessible design with additional provisions for life-support equipment, ceiling hoists and emergency power. For New Build and New Build (refurbished) dwellings enrolled from 1 July 2021, an accredited SDA assessor certifies the dwelling against the SDA Design Standard (October 2019) at design stage and again as built.

Is High Physical Support just extra accessible Fully Accessible?

No. Fully Accessible sets the physical-access baseline. High Physical Support adds the life-support, hoist and emergency-power suite required by the Design Standard for that category. Exact clause applicability is shown by the icons in the Design Standard PDF. Designers should not rely on informal dimension lists.

How is High Physical Support certified in NSW?

Certification is a two-stage process: provisional design certification when the design is lodged for approval, then final as-built certification before enrolment. The assessor must be independent of the provider, developer and owner. Sydney Access Consultants can advise on design documentation or act as the independent certifying assessor (SDA00039), but not both on the same development. NSW building work remains assessed under NCC 2022 Amendment 2 until NCC 2025 adoption on 1 May 2027.

Can one dwelling be multi-category?

Yes. A single dwelling may be certified under more than one design category if shared areas meet the minimum requirements of every enrolled category.

From: Improved Liveability SDA: what the design category requires for new builds in NSW

What is Improved Liveability SDA?

Improved Liveability is one of four NDIS Specialist Disability Accommodation design categories. The NDIA defines it as housing designed to improve liveability by incorporating a reasonable level of physical access and enhanced provision for people with sensory, intellectual or cognitive impairment. It suits participants who do not necessarily use a wheelchair but benefit from clearer layouts, contrast and wayfinding. New-build Improved Liveability dwellings must be certified by an accredited SDA assessor against the SDA Design Standard at design stage and again as built.

Is Improved Liveability just Livable Housing Silver plus one extra feature?

Only for older stock. The NDIA 2026-27 SDA Pricing Arrangements apply the Livable Housing Australia Silver plus features such as luminance contrast, improved wayfinding or lines of sight description to Existing and Legacy Stock, and to new builds first enrolled before 1 July 2021. New Build and New Build (refurbished) dwellings since 1 July 2021 must meet the SDA Design Standard (October 2019), which sets clause-by-clause requirements for each category.

What luminance contrast does an Improved Liveability dwelling need?

The SDA Design Standard requires at least 30 per cent luminance contrast at every doorway, between the door leaf and jamb, the leaf and adjacent wall, the architrave and wall, the leaf and architrave, or the jamb and adjacent wall, over a minimum 50 mm width.

Can an Improved Liveability dwelling have bedrooms upstairs?

Yes. Clause 1.1 says it is reasonable for Improved Liveability bedrooms to be on a level reached only by steps. The WC, shower, basin, living area, kitchen and laundry still need to be on the entry level or a lift-served level.

Can one dwelling be Improved Liveability and another category?

Yes. The Design Standard allows a single dwelling to be certified under multiple design categories. All shared areas must comply with the minimum requirements of every enrolled category. Each category has to be shown on the drawings.

From: Livable Housing Design assessments in NSW: LHA vs NCC LHDS

Is NCC livable housing mandatory for new houses and apartments in NSW?

Under the current NSW variations, Parts G7 and H8 are left blank. LHDS is not a mandatory NCC DtS requirement for Class 1a buildings or Class 2 sole-occupancy units in NSW. A DCP, brief or condition may still require livable housing features. Re-check the NCC NSW variations if policy changes, including when NSW adopts NCC 2025 on 1 May 2027.

Should we use LHA Silver or the ABCB LHDS if both are optional?

Use the document the DCP, provider or client names. If the brief is silent and the work is in NSW, LHA Silver is still the language most local briefs understand. LHDS is the better citation where another jurisdiction’s NCC Parts apply, or where a DCP names the ABCB Standard. Neither is full wheelchair accessibility.

Do we need a separate livable housing report if we already have a disability access report?

Often yes, if a DCP or brief nominates an LHA level or LHDS. A Premises Standards access report covers common areas and public parts. It does not automatically assess every Silver or Gold element inside sole-occupancy units.

From: NSW Better Homes: what SDA providers should check before the 2027 EOI

What is the NSW Better Homes project?

Better Homes is the NSW Government's plan for its legacy disability housing: about 800 government-owned properties used for disability housing, respite and day programs, many of them ageing. Most are leased to registered SDA providers. The Department of Communities and Justice plans to upgrade homes where feasible, redevelop others, and offer properties to SDA providers under long-term arrangements. An EOI for vacant properties suitable for SDA is planned to open in February 2027.

Do older NSW government group homes meet the SDA Design Standard?

Often not without work. Many were built before the NDIS and the SDA Design Standard.

Can the same consultant design the upgrade and certify it as SDA?

No. An accredited SDA assessor must be independent of the design. If we provide the gap assessment and design input, a different assessor must certify the work.

Will DCJ sell legacy properties?

DCJ says a small number of properties that are not suitable for disability or other government use may be offered to the market.

Do I need an access report for upgrade works?

Only if the works need building approval. If they do, NSW assesses Construction Certificates against NCC 2022 Amendment 2 until NCC 2025 starts on 1 May 2027.

Does Sydney Access Consultants cover regional NSW?

Yes. We cover Sydney and regional NSW, including the Mid North Coast, for SDA property checks and related access work.

From: Robust SDA: what the design category requires for new builds in NSW

What is Robust SDA?

Robust is one of four NDIS Specialist Disability Accommodation design categories. It is housing designed to incorporate a reasonable level of physical access provision and be very resilient, reducing the likelihood of reactive maintenance and reducing the risk to the participant and the community, certified against the SDA Design Standard for New Build dwellings enrolled from 1 July 2021. An accredited SDA assessor certifies the dwelling at design stage and again as built.

How does Robust physical access relate to Improved Liveability?

Robust physical access generally aligns closer to Improved Liveability than to Fully Accessible or High Physical Support. The car-space concession and door clearances follow the same pattern. Confirm exact applicability from the Design Standard icons.

Does a Robust new build follow informal durability lists?

No. For New Build and New Build (refurbished) enrolled from 1 July 2021, the SDA Design Standard (October 2019, Edition 1.1) is the test. Informal lists go stale. Clause 25 sets the resilience requirements.

Can one dwelling be Robust and another category?

Yes. The Design Standard allows a single dwelling to be certified under multiple design categories. All shared areas must comply with the minimum requirements of every enrolled category.

From: Access-led design documentation support for architects (NSW)

Do you replace our project architect?

No. Access consulting input and documentation support sit alongside your architect, designer or building surveyor. The project architect remains responsible for design authorship and documentation. SAC’s role is specialist access review, mark-up and coordination so accessible entries, bathrooms, circulation and egress are documented in a way the design team and the certifier can both work with.

Is design documentation support the same as a DA or CC access report?

No. Design documentation support is collaborative mark-up and stage advice on the drawing set. A disability access report for DA, CC or CDC is a lodgement-ready document prepared for council or a registered certifier against the Premises Standards, NCC access provisions and referenced Australian Standards. Many projects need both.

Can you mark up our construction set and also lodge the certifier access report?

Yes, those are different products on a non-SDA job: mark-up for the design team, then a formal report when the checklist or consent calls for one. Do not treat the marked-up PDF as the lodgement report.

Can you give SDA design advice and certify the same dwelling?

No, not on the same development. NDIS SDA Design Standard certification must be issued by an independent accredited SDA assessor.

What should we send to get started?

The current drawing set, classification, stage (feasibility through construction detailing), any RFI or overlay, and the questions you want marked up first.

From: SDA Design Standard certification: provisional design vs final as-built

Do I need both provisional and as-built SDA certification?

For newly built dwellings seeking SDA enrolment under the Design Standard pathway, yes. Provisional certification is before construction. Final as-built certification is after the dwelling is built. Final as-built registration is generally not accepted unless design-stage documents were previously lodged with the NDIA.

Can our project architect certify the SDA Design Standard compliance?

No, not if they designed the project or are otherwise conflicted. NDIS requires an accredited third-party assessor independent of the provider, developer and owner.

Does Design Standard certification mean NDIA will enrol the dwelling?

No. Certification supports the provider’s enrolment application. Enrolment is a separate NDIA decision.

What does the assessor lodge with NDIA, and what do we enrol ourselves?

The assessor lodges the Certificate, Assessment Summary Form and Assessment Checklist at both stages. Only the registered SDA provider enrols the built dwelling through the my NDIS provider portal.

From: SDA assessment for existing dwellings in Queensland

Can a Sydney-based SDA assessor work on a Queensland dwelling?

Yes. The NDIA lists accredited SDA assessors by state, but says they are not restricted to those regions and can provide services across all States and Territories. Accreditation is national. Access consultants must be ACA accredited members. Gary Finn is ACA Accredited Member #435 and SDA assessor SDA00039 (current).

Which SDA pathway fits an existing Queensland dwelling?

Existing stock and legacy stock are assessed against the SDA Rules definitions. The tests concern design (shared areas plus a bedroom and bathroom meeting, or for legacy substantially meeting, the minimum design requirements for a category) and residency history. Do not rely on numeric thresholds quoted from memory. Link the Rules.

From: SDA funding after 1 October 2026: what the NDIS reset does, and does not, change

Did the 1 October 2026 NDIS funding changes cut Specialist Disability Accommodation?

No. The Department of Health, Disability and Ageing states that the reset applies to social, economic and community participation supports and improved daily living skills supports. Specialist Disability Accommodation is listed among critical supports that are not impacted.

Which plan supports are reduced, and when do participants see the change?

The published reductions are 50 per cent for social, economic and community participation supports and 10 per cent for improved daily living skills supports, applied when a plan is created, reassessed or renewed, on a staged rollout. That is not an SDA price-limit change.

Is the SDA Design Standard review the same as the funding reset?

No. The funding reset is a plan-support determination for named support groups. The Design Standard review is a separate NDIA track toward Edition 2.0 recommendations. Until the NDIA publishes a new Standard and transition rules, new-build certification follows the published Design Standard in force.

Should providers pause provisional or as-built certification because of the reset?

Not on the basis of the funding reset alone. Keep the independent accredited assessor engaged, document to the published Design Standard, and treat Edition 2.0 rumours separately from plan-support messaging.

What should architects and developers commission now for NSW SDA dwellings in design?

Commission either independent Design Standard certification or design documentation support, not both from the same firm, and commission the NCC and Premises Standards access report the consent or certifier requires. State the Design Standard edition on the drawings.

How does SDA funding differ from an NCC access report?

SDA funding is an NDIS payment stream for enrolled dwellings that meet the Design Standard and the provider rules. An NCC access report is evidence for a council or certifier that the building meets Premises Standards and NCC access provisions. One does not replace the other.

From: SDA vs Livable Housing vs Adaptable Housing: which pathway for NSW projects?

Which standard do we use for disability housing in NSW?

It depends on funding and planning controls. New-build SDA enrolment uses the Design Standard. A DCP “adaptable” control uses AS 4299. A brief or DCP that names livable housing uses the named LHA or LHDS document. Many multi-residential projects also need a separate Premises Standards / NCC access report for common areas.

What is the difference between SDA, livable housing and adaptable housing?

SDA is an NDIS housing pathway. New SDA dwellings are certified against the SDA Design Standard by an independent accredited assessor; a registered provider then enrols the dwelling. Livable housing is baseline liveability under LHA and/or LHDS. Adaptable housing under AS 4299 designs nominated dwellings so they can be modified later, usually to meet a DCP percentage and class. They are not synonyms.

Is livable housing the same as SDA certification?

No. Meeting LHA Silver on a mainstream dwelling does not enrol that dwelling as SDA.

Can AS 4299 Class C or LHA Silver replace SDA Design Standard certification?

No. For new-build enrolment the NDIS requires Design Standard certification at design stage and again as-built.

From: Who Pays for SDA Homes? SDA Pricing, Building Types and Enrolment Changes Explained (2026-27)

Who pays to build an SDA home?

The investor or provider funds the construction. The NDIS does not pay for the build. Once the dwelling is enrolled, the registered SDA provider receives SDA funding for each eligible NDIS participant living there, at an amount set by the NDIS Pricing Arrangements for Specialist Disability Accommodation. The participant also pays a Reasonable Rent Contribution, capped at $516.11 a fortnight for a single person for 20 March to 19 September 2026. Support services such as SIL are funded separately.

Can a strata-subdivided duplex be enrolled as an SDA house?

It is unlikely to fit. Under Schedule 1 of the NDIS SDA Rules 2020, an SDA house cannot share a wall, roof, entry, driveway, carpark or outdoor area with another dwelling, apart from one small ancillary dwelling. A villa or duplex is a semi-attached dwelling within a single title or strata area, separated by a fire-resistant wall. Two strata lots that share a wall have the features of a villa or duplex, so plan the building type and the subdivision together, before design-stage certification.

What happens if I change an SDA dwelling's building type after enrolment?

The SDA provider must tell the NDIA in writing within 5 business days of a change, or a likely change, to the building type or design category. The change is then lodged through the my NDIS provider portal as a modification. The NDIA treats that as a new enrolment application, so all the evidence requirements apply again, including SDA as-built certification for the new configuration.

Back to all questions and answers