Working with Sydney Access Consultants: questions and answers
Questions about how to engage us, fee proposals and payment, site visits, and where we work: Sutherland Shire and St George, Bayside and Canterbury-Bankstown, the Mid North Coast and Perth. Each answer is short and links to the page that covers the subject in full. Answers refer to the code in force in NSW: NCC 2022 Amendment 2 until NSW adopts NCC 2025 on 1 May 2027.
Engaging us: process, fees and timing
How do I engage Sydney Access Consultants?
Send the drawings and a short description of the project, or call the office. If the scope is not clear from the documents, we arrange a short call. We then issue a written fee proposal with a defined scope and a fixed fee. Work starts once you accept the proposal in writing and pay the mobilisation fee it sets out.
Do you charge for a fee proposal or a first discussion?
No. The written fee proposal is free and without obligation. The free initial consultation is a review of plans only. On-site audits and detailed advice are chargeable.
Do you quote fixed fees?
Yes. Almost all work is quoted as a fixed fee for a named list of documents, once we have seen the drawings and know the approval stage. Hourly rates are used only for open-ended advisory work, and only where that is agreed beforehand.
More: How much does an access report cost in Sydney?
What are your payment terms?
The fee proposal sets the terms for each job. The usual arrangement is a mobilisation fee on acceptance, with the balance due on delivery of the final draft report. Larger projects are staged against milestones.
Can an access report be done remotely, or do you need to visit the site?
Both are possible. Plan assessments for DA, CC and CDC are prepared from the drawings and specifications, so the project can be anywhere. Audits of existing buildings and construction-stage inspections need a site visit.
More: Existing-building access audits
How quickly can you start?
Start dates depend on the size of the job and current workload, and the fee proposal gives a date. Tell us your lodgement deadline when you enquire so the programme can be confirmed before you commit.
Can you work with our architect, builder or project manager?
Yes, that is the usual arrangement. The architect remains the author of the design and we provide the specialist access input, working with the builder, project manager and certifier as needed.
More: Access-led design documentation
Do you provide support during construction?
Yes. Hold-point access inspections at set-out, before linings, before tiling and at fit-off catch access defects while they can still be corrected. An occupation certificate access inspection then checks the finished building.
More: Mid-construction access inspections in NSW
When is the mobilisation fee payable?
On acceptance of the fee proposal, before work starts. The proposal states the amount and how to pay it.
How is the mobilisation fee calculated?
It is a fixed lump sum set out in the fee proposal, including GST. For access consulting work it can be up to 50 per cent of the fee, and for certification it can be the whole fee. If the scope changes, any variation is confirmed in writing.
More: How much does an access report cost in Sydney?
Is the mobilisation fee refundable?
Generally no, because it pays for the initial work we carry out as soon as the job starts. If we do not perform those services, you may be entitled to a pro rata refund for the part not delivered. Raise any concern with us early.
Why do you charge a mobilisation fee?
It lets us commit time to your project from the first day and covers set-up costs that are not otherwise recoverable. It also confirms the commitment on both sides.
Can the mobilisation fee be negotiated or waived?
We can discuss an adjustment where the project warrants it, but the fee is a standard part of our agreements. Any change must be agreed in writing.
Our Mid North Coast partner
What qualifications does Sandy Gray hold?
Sandy Gray is a Qualified Access Consultant (ACAA), with a Diploma of Access Consulting, Certificate IV in Training and Assessment, and prior architect registration. She’s an active contributor to Australian Standards and access forums, ensuring our advice is current and authoritative.
More: Access consultant Mid North Coast
From: Access consultant for Bayside and Canterbury-Bankstown: DA access reports, adaptable and livable housing
Does Bayside Council require adaptable housing?
Yes. Under Bayside Development Control Plan 2022, section 3.6.2 C3, at least 20% of dwellings in new multi dwelling housing, shop-top housing and residential flat buildings with 10 or more dwellings must be adaptable dwellings designed and built to AS 4299 Class C. Where there is no lift, the adaptable dwellings go on the ground floor. Half of the adaptable dwellings must be allocated accessible resident parking, and that parking forms part of the unit's strata lot.
What does Canterbury-Bankstown Council require for accessible housing?
Canterbury-Bankstown DCP 2023 (Chapters 5.1 and 5.2, amended March 2026) uses the Livable Housing Design Guidelines rather than an AS 4299 percentage. Residential flat buildings and shop-top housing need at least 40% of new dwellings to comply: 20% at Silver level and 20% at Gold level. Boarding houses and co-living need 20% of rooms at Silver. Council can vary the step-free dwelling access element where step-free paths are shown to be impossible.
Who can prepare the access report for a Bayside or Canterbury-Bankstown DA?
An accredited access consultant who checks the DCP chapter in force when the job starts. Sydney Access Consultants is based in Hurstville and works regularly in both council areas. Principal Gary Finn is an Accredited Member of the Access Consultants Association (member 435). The free initial consultation reviews floor plans only.
What does "20% Silver and 20% Gold" mean for my apartment schedule?
For new apartments and shop-top housing in Canterbury-Bankstown, at least 40% of new dwellings must meet the Livable Housing Design Guidelines, split into at least 20% Silver and at least 20% Gold. Schedule them separately from any other controls.
Do co-living or boarding house projects in Canterbury-Bankstown need livable rooms?
Yes. Both Chapter 5.1 and Chapter 5.2 require at least 20% of new boarding rooms or private rooms at Silver.
How many accessible parking spaces go with adaptable units in Bayside?
Half of the adaptable dwellings get allocated accessible resident parking. Those spaces form part of the adaptable unit's strata lot.
Do you cover Rockdale, Mascot, Bankstown and Campsie?
Yes. These are regular areas, close to the Hurstville office.
From: Access consultant Mid North Coast: audits and DA/CC reports (Port Macquarie, Coffs, Taree, Forster)
Is there an access consultant on the NSW Mid North Coast?
Yes. Sydney Access Consultants has an established Mid North Coast presence through Sandy Gray, based full-time at Black Beach. Sandy takes local projects across the region, including Port Macquarie, Coffs Harbour, Taree, Forster and surrounds. Engagements are coordinated with the Hurstville practice so local site work and NSW lodgement standards sit on the same file.
Can you prepare a disability access report for a Port Macquarie or Coffs Harbour DA or CC?
Yes. Mid North Coast projects can be supported with plan assessments and disability access reports for DA and CC packages, and for CDC where that pathway applies. Reports use the Premises Standards, NCC access provisions in force in NSW, AS 1428, and any applicable council overlay.
Do you offer on-site access audits in Forster and Taree?
Yes. On-site audits of existing buildings and facilities can be arranged across the Mid North Coast, including Forster, Taree and surrounding areas, with prioritised findings and practical options.
Is Mid North Coast work only remote from Sydney?
No. Plan assessment can start from drawings anywhere. Site audits and local coordination run from Black Beach. Hurstville remains available for complex Performance Solutions and specialist input.
From: Disability access consultant Perth: access reports for WA building approval
Do you prepare disability access reports for Perth and WA building permits?
Yes. Plan assessments and disability access reports for Perth and Western Australia projects support design teams and registered building surveyors documenting access compliance for building-permit packages, including material that can support a Certificate of Design Compliance (BA3) assessment. This practice does not issue the BA3 or the building permit.
Do you have a Perth office?
The practice is based in Hurstville and is building a presence in the Perth market. WA projects are assessed against the WA pathway and the NCC edition in force for the job.
What is the difference between a WA Certificate of Design Compliance and an NSW Construction Certificate?
Different statutes, different decision-makers. In WA a registered building surveyor issues the Certificate of Design Compliance (BA3) as part of the building-permit pathway. In NSW a registered certifier issues a Construction Certificate (or a Complying Development Certificate, which is a different NSW instrument). Do not use “CDC” for both.
Can you help with a Universal Access Statement for a Perth DA?
Yes, where the LGA checklist asks for one. Confirm the planner’s product name before the brief is locked.
From: Access consultant Sutherland Shire and St George: access reports and audits in Cronulla, Sutherland and Hurstville
Is there an access consultant based in the Sutherland Shire or St George area?
Yes. Sydney Access Consultants is based at Suite 7/438 Forest Road, Hurstville, and principal Gary Finn, an Accredited Member of the Access Consultants Association (#435), lives in Cronulla. The practice provides the full range of access services across Sutherland Shire, Georges River, Bayside and Canterbury-Bankstown.
Does Sutherland Shire Council require an adaptable housing or access report with a DA?
For multi dwelling housing and residential flat buildings, the DCP says an applicant will need to demonstrate compliance with the adaptable housing provisions. That may include a report by an appropriately qualified person with the DA. Adaptable dwellings are AS 4299 Class C: none for 3 to 5 dwellings, and 20% for 6 or more. Livable dwellings at Silver sit on top of that.
Does Georges River Council require an access report for a Hurstville or Kogarah DA?
Section 3.17 says an access report prepared by a relevantly qualified access consultant may be required for medium to high density residential with 10 or more dwellings, housing for aged people or people with disabilities, and other development that must comply with the Premises Standards. High density Part 6.3.11 also requires a report demonstrating adaptable unit compliance.
Can you do an on-site access audit of a shop, cafe or club in Cronulla?
Yes. Cronulla is a short trip from Hurstville, and Gary lives in Cronulla. Audits cover the affected part, prioritised findings and, where relevant, unjustifiable hardship.
Which areas do you cover from Hurstville?
Sutherland Shire, Georges River, Bayside and Canterbury-Bankstown, all regularly.